润滑脂高温稳定剂
HDP
HDP润滑脂高温稳定剂
型号 / 牌号:HDP13
01 / INTRODUCTION
产品介绍
HDP润滑脂高温稳定剂是由精心设计的分子结构和均衡调配的组分,经专用生产工艺设备加工制成。
性能特点
以下为所提供产品资料中的描述,实际性能以确认后的技术资料和工况验证为准。
- 提高以12-羟基硬脂酸皂类为稠化剂的润滑脂的高温胶体稳定性,减缓高温粘度和稠度下降趋势,提升润滑脂的最高使用温度,对润滑脂的其它性能几无不良影响。
应用与使用建议
- 用于含12-羟基硬脂酸皂类稠化剂的润滑脂高温性能提升,特别能显著提高锂基润滑脂的高温粘度、高温稠度和滴点。
- 建议在常温加入,混合均匀即可,最高调配温度不宜超过50℃。
02 / TECHNICAL DATA
技术指标
表格可横向滑动查看完整参数与试验方法。
中文性能指标
| 项目 | HDP12 | HDP13 | 检验方法 |
|---|---|---|---|
| 外观 | 白色固体 | 无色到浅黄液体 | 目测 |
| 气味 | 淡 | 淡 | 感官 |
| 密度,g/ml | 0.88-0.95 | 0.88-0.95 | 企业方法 |
| 熔点,℃ | 45 | 0 | GB/T 510 |
| 闪点(开口), ℃ | >150 | >150 | GB/T3536 |
中文使用效果
| 润滑脂类型/滴点, ℃ | 空白 0% | HDP12 1% | HDP12 3% | HDP13 1% | HDP13 3% |
|---|---|---|---|---|---|
| 无水钙 | 153 | 162 | 188 | 163 | 188 |
| 锂基脂 | 195 | 241 | 255 | 241 | 255 |
| 复合锂 | 268 | 295 | 330+ | 305 | 330+ |
#润滑脂的脂肪酸组成和锂钙比例等对滴点提升效果有较大的影响,以上数据仅供参考,客户需要根据自身产品情况和需要调整HDP添加剂的加入量。
English typical property
| ITEM | HDPA/HDPB/HDPC/HDPD | Method |
|---|---|---|
| Appearance/odor | Colorless to pale transparent liquid with characteristic odor | visual |
| Density,g/ml | 0.88-0.95 | In-house |
| Pour point,℃ | <-10 | GB/T3535 |
| Flash point(open cup), ℃ | >150 | GB/T3536 |
English performance
| Drop point, ℃(Lithium) | Blank 0% | A 1% | A 3% | B 1% | B 3% | C 1% | C 3% | D 1% | D 3% |
|---|---|---|---|---|---|---|---|---|---|
| Drop point, ℃(Lithium) | 197 | 300 | 330+ | 305 | 330+ | 260 | 330+ | 284 | 330+ |
Composition of fatty acids and lithium/calcium ratio in grease greatly affect final performance of HDP series, the data just for reference only, it is users’ duty to adjust treat level per their products. HDP series is also effective to anhydrous calcium grease.

#润滑脂的脂肪酸组成和锂钙比例等对滴点提升效果有较大的影响,以上数据仅供参考,客户需要根据自身产品情况和需要调整HDP添加剂的加入量。
Composition of fatty acids and lithium/calcium ratio in grease greatly affect final performance of HDP series, the data just for reference only, it is users’ duty to adjust treat level per their products.
HDP series is also effective to anhydrous calcium grease.
英文资料补充:
For high temperature performance improvement of grease based on 12-HSA soap, especially effectively susceptible to lithium 12-HSA resulting in higher viscosity, thickness and drop point.
Recommended to be blended into grease under room temperature or 50 ℃ below.
HDP series should be stored in clean, dry and away from direct sunlight, slightly translucent change has little affect to its performance.
Once opened, contents should be used up ASAP, intake of moisture will affect its performance.
With characteristic odor, wear proper protective glove and mask to prevent intake or contact with eyes, mouth , nose or skin.
Refer to SDS for detail information.
英文原资料介绍与性能:
HDP series temperature resistant improver is composed of delicately formulated molecular structure and components and made by dedicated production process and facilities.
Improve colloidal stability of grease based on 12-HAS soap under high temperature, mitigate lowering tendency of viscosity and thickness under higher temperature, enhance upper temperature threshold of grease, and impart negligent unwell effects to grease.
03 / STORAGE & PACKAGING
包装与储存
20L塑料桶,200L铁桶。
产品应贮存于清洁、干燥、避光、荫凉处。储存后有浑浊现象不影响产品的使用性能。如凝固,请放到100℃以下水中、烘箱或加热带加热熔化,加热时注意打开盖子。
包装启封后,应尽快用完。长期接触空气会对性能有一定的影响。因此用后应及时将盖封严,防止空气或水分等混入影响品质。
产品高温下有一定气味,操作时注意要穿戴适当的劳动保护用具,防止眼睛、口鼻、皮肤接触和吸入。
资料来源
HDP润滑脂高温稳定剂TDS.docx · T1, T2, T3, T4
按所提供产品资料整理;性能、环保及标准符合性表述为原资料声明,不代表另行认证。页码因文档排版可能变化,采用文件名与表格定位。包装、技术指标与适用条件请在订购前确认。
